Load data for .32 ACP (7.65 Browning) + .312 | 60gr | Hornady XTP

Recommended Powder(s): ADI AS 50N, Maxam CSB 2, ReloadSwiss RS 12, Vihtavuori N320

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.312 \| 60gr \| Hornady XTP
Manufacturer SKU:	32010
Bullet Weight:	60gr \| 3.9g
Bullet Diameter:	0.312" \| 7.92mm
Bullet Length:	0.350" \| 8.9mm
Caliber:	.32 ACP (7.65 Browning) load data
Case Length (l3):	0.677" \| 17.2mm
Cartridge Length (C.O.L.):	0.905" \| 23.0mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	9.3 Grains of Water \| 0.60 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	23206 psi \| 1600 bar
LID:	LID_B2726_C409
Last updated:	2025-01-01

Load data for 72 loads in caliber .32 ACP (7.65 Browning) with .312 | 60gr | Hornady XTP bullet and 36 powders such as ADI AS 50N, Maxam CSB 2, ReloadSwiss RS 12, Vihtavuori N320. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	75%	19754	85%	**19	96%
ADI AS 30	<<locked>>	80%	20233	87%	**40	100%
ADI AS 50N 👍	<<locked>>	79%	20697	89%	**93	100%
[Accurate No. 2]*	<<locked>>	80%	20030	86%	**53	84%
Accurate Solo 1000	<<locked>>	79%	20421	88%	**53	100%
Accurate Solo 1250	<<locked>>	89%	19914	86%	**96	95%
Alliant BULLSEYE	<<locked>>	77%	20073	86%	**16	90%
[Alliant UNIQUE]*	<<locked>>	90%	19305	83%	**29	89%
Baschieri & Pellagri 100	<<locked>>	81%	19160	83%	**40	98%
Hodgdon Clays	<<locked>>	66%	18463	80%	**19	100%
Hodgdon Universal	<<locked>>	83%	19754	85%	**19	96%
[Hodgdon TrailBoss]*	<<locked>>	94%	6367	27%	**0	89%
Lovex S011	<<locked>>	68%	19319	83%	**37	96%
Lovex S020	<<locked>>	84%	19986	86%	**16	91%
Maxam CSB 1	<<locked>>	94%	20465	88%	**02	96%
Maxam CSB 2 👍	<<locked>>	96%	19493	84%	**65	99%
Maxam CSB 3	<<locked>>	84%	19232	83%	**70	98%
Maxam CSB 4	<<locked>>	82%	20189	87%	**80	100%
Maxam CSB 5	<<locked>>	76%	20088	87%	**47	100%
[Ramshot Silhouette]*	<<locked>>	75%	20276	87%	**25	86%
Ramshot Zip	<<locked>>	63%	20682	89%	**99	97%
ReloadSwiss RS 12 👍	<<locked>>	83%	19986	86%	**68	100%
ReloadSwiss RS 20	<<locked>>	94%	19174	83%	**29	90%
Rottweil P 801	<<locked>>	76%	20755	89%	**35	100%
[SNPE Vectan A0]*	<<locked>>	91%	20146	87%	**70	88%
SNPE Vectan BA 9	<<locked>>	80%	19885	86%	**57	93%
SNPE Vectan BA10	<<locked>>	65%	18695	81%	**48	100%
SNPE Vectan BA9 1/2	<<locked>>	83%	19247	83%	**76	95%
[Somchem MP200]*	<<locked>>	82%	19769	85%	**06	87%
Somchem MS200	<<locked>>	85%	19638	85%	**89	90%
Vihtavuori N310	<<locked>>	67%	20856	90%	**37	100%
Vihtavuori N320 👍	<<locked>>	83%	19928	86%	**06	100%
Vihtavuori N32C Tin Star	<<locked>>	92%	12792	55%	**96	100%
Vihtavuori N330	<<locked>>	89%	20407	88%	**62	97%
[Vihtavuori N340]*	<<locked>>	88%	19160	83%	**83	88%
Winchester 231	<<locked>>	71%	20682	89%	**99	97%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	61%	13605	59%	**35	91%
ADI AS 30	<<locked>>	61%	12662	55%	**43	99%
ADI AS 50N	<<locked>>	62%	13561	58%	**89	96%
[Accurate No. 2]*	<<locked>>	73%	16128	69%	**48	80%
Accurate Solo 1000	<<locked>>	61%	13169	57%	**56	96%
[Accurate Solo 1250]*	<<locked>>	61%	9427	41%	**5	82%
[Alliant BULLSEYE]*	<<locked>>	62%	13416	58%	**15	82%
[Alliant UNIQUE]*	<<locked>>	75%	13416	58%	**38	81%
Baschieri & Pellagri 100	<<locked>>	61%	11110	48%	**01	91%
Hodgdon Clays	<<locked>>	61%	16070	69%	**66	100%
[Hodgdon Universal]*	<<locked>>	60%	10878	47%	**37	87%
[Hodgdon TrailBoss]*	<<locked>>	72%	4583	20%	**9	81%
Lovex S011	<<locked>>	61%	15476	67%	**35	93%
[Lovex S020]*	<<locked>>	66%	11864	51%	**76	82%
[Maxam CSB 1]*	<<locked>>	61%	9050	39%	**5	81%
[Maxam CSB 2]*	<<locked>>	60%	7556	33%	**8	85%
[Maxam CSB 3]*²	<<locked>>	59%	9993	43%	**8	89%
Maxam CSB 4	<<locked>>	60%	11356	49%	**30	95%
Maxam CSB 5	<<locked>>	62%	13938	60%	**02	100%
[Ramshot Silhouette]*	<<locked>>	67%	15780	68%	**98	81%
Ramshot Zip	<<locked>>	60%	18739	81%	**57	96%
ReloadSwiss RS 12	<<locked>>	62%	10414	45%	**86	95%
[ReloadSwiss RS 20]*	<<locked>>	76%	12343	53%	**02	80%
Rottweil P 801	<<locked>>	62%	13735	59%	**68	100%
[SNPE Vectan A0]*	<<locked>>	76%	13880	60%	**93	81%
[SNPE Vectan BA 9]*²	<<locked>>	59%	11284	49%	**7	83%
SNPE Vectan BA10	<<locked>>	61%	16505	71%	**99	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	60%	10486	45%	**7	84%
[Somchem MP200]*	<<locked>>	73%	15273	66%	**71	82%
[Somchem MS200]*	<<locked>>	67%	12430	54%	**60	81%
Vihtavuori N310	<<locked>>	63%	18362	79%	**91	100%
Vihtavuori N320	<<locked>>	62%	10994	47%	**53	95%
Vihtavuori N32C Tin Star	<<locked>>	63%	6454	28%	**7	95%
[Vihtavuori N330]*	<<locked>>	60%	8978	39%	**1	82%
[Vihtavuori N340]*	<<locked>>	73%	12908	56%	**99	81%
Winchester 231	<<locked>>	61%	15331	66%	**65	93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.